Mobile Air conditioners for Tent & Camp

The tent cooling units are portable types of air conditioners for tents, military camps, relief camps, field hospitals, makeshift hospitals, temporary buildings etc. These are manufactured by Dantherm, Denmark.

Models of portable air conditioners for tents, field hospitals, relief camps, temporary housing

We are listing below some of our popular models of cooling units.

1. Tent cooler model VAC-AC-24

   The features of this model are listed below:

   1. The tent cooler VAC-AC-24 is built into a rectangular shaped enclosure manufactured from galvanized and powder-coated steel sheet.
   2. The colour of the cooling unit is pure white, RAL 9010.
   3. Should you require a special colour please check with us.
   4. This cooler can work at ambient temperatures up to +55°C.
   5. The refrigerant used is R134a refrigerant.
   6. In order to ensure a long life for the compressor, there is a High/low-pressure switch.
   7. You can connect the tent cooling unit to 230 Volts mains supply or a generator using a 10m power cable with a CEE plug.
   8. The tent cooling unit has a thermostat wired into the cooler to control the temperature.
   9. There are openings of 315 mm dia for Inlet and discharge openings. You can use flexible ducts for the same.
   10. We can supply the cooling unit with optional wheels.
   11. One technician can do the setup and operations very easily.

   Specifications of tent cooler (mobile) model VAC-AC-24

   1. The operating temperature range for cooling is 20 to 55 degrees Celsius.
   2. Airflow is 2180 cubic metres per hour.
   3. The refrigerant of the tent air conditioner VAC-AC-24 is R134a.
   4. Cooling capacity at 49/49 degrees Celsius, 30% relative humidity is 6.0 kilowatt /20400 BTU.
   5. The power supply of this temporary air conditioner is 230 Volt, Single-phase, 50 Hz.
   6. The maximum current of this cooling unit for field hospitals is 16A.
   7. Locked motor amperage (LRA) is 46A.
   8. The maximum system pressure of tent cooling unit VAC-AC-24 is 25 bar.
   9. Product size (h x l x w) is 1110 x 919.1 x 752.3 millimetres.
   10. The weight of VAC-AC-24 is 160 kilograms.

2. Tent air conditioner (mobile) model VAC-AC-M7MKII

   The features of this model are listed below:

   1. The tent cooler VAC-AC-M7MKII is built into a rectangular shaped enclosure manufactured from galvanized and powder-coated steel sheet.
   2. This cooler can work at ambient temperatures up to +55°C.
   3. You can connect the tent cooling unit to 230 Volts mains supply or a generator using a 15m power cable with a CEE plug.
   4. There is an option to operate only ventilation without cooling.
   5. The thermostat is wired into the tent cooling units. The thermostat can be kept inside the tent.
   6. There are filters in front of the internal air intake as well as in front of the external air intake.
   7. The filters are easily removable and washable without any technical assistance.
   8. It has two inbuilt wheels which are useful for easy movements.
   9. One technician can do the setup and operations very easily.
   10. The wheels can be easily removed if you want to do so to stow multiple units.

   Optional accessories for Tent air conditioner model VAC-AC-M7MKII

   1. If you want to fix the thermostat at a distance of up to 15 meters, we can provide an optional remote thermostat with a cable.
   2. We can supply various sizes of insulated and non-insulated air ducts as per the sizes below.
   3. Insulated, flexible air duct of diameter 315 mm, 3000 mm long.
   4. Non-insulated, flexible air duct of diameter 315 mm, 5000 mm long.
   5. Non-insulated, flexible air distribution duct of diameter 315 mm, 5000 mm long.
   6. Non-insulated, flexible air distribution extension duct of diameter 315 mm, 2000 mm long.
   7. Insulated, flexible air duct of diameter 225 mm, 3000 mm long.
   8. Storage bag for insulated air duct Dia 225 mm.
   9. Non-insulated, flexible air distribution duct of diameter 225 mm, 6000 mm long.

   Specifications of air conditioner for temporary camps, model VAC-AC-M7MKII

   1. The operating temperature range for cooling is 20 to 55 degrees Celsius.
   2. The operating temperature range of this camp air conditioner for heating is -20 to +20 degrees Celsius.
   3. The airflow of this cam cooling unit is 2500 cubic metres per hour.
   4. The sound level of this cooler at 1.5 metres is 69dB(A).
   5. The refrigerant of VAC-AC-M7MKII is R134a.
   6. The maximum cooling capacity is 7.6 kilowatt.
   7. The heating capacity (with electric heating element) of this model of a medical camp cooler is 7.2 kilowatt.
   8. The power supply is 400 Volt, Three-phase, 50 Hz.
   9. The maximum running current for cooling is 7.2A; for heating is 13A.
   10. Locked rotor amperage (LRA) is 24A.
   11. Maximum power consumption for cooling is 3700W; for heating is 7700W.
   12. The hose connection is 1 x 315 or 2 x 225 Ø mm.
   13. Product size(h x l x w) is 1150 x 796 x 756 millimetres.
   14. The weight of this tent air conditioner VAC-AC-M7MKII is 190 kilograms.

3. Medium capacity camp air conditioner with heater VAC-AC-M11

   The features of this model are listed below:

   1. The VAC-AC-M11 model of the camp air conditioner is built into a strong metal frame with insulated panels.
   2. They are suitable for labour camps, workers camps etc. for all industries including the oil & gas industry.
   3. These models are a powder-coated finish.
   4. The standard paint finish of this labour camp coolers is a standard sand colour.
   5. It has an additional option for a built-in heater.
   6. This can provide a heating function when the ambient temperature is below 20°C.
   7. The scroll compressor provides a high degree of reliability.
   8. This camp air conditioner with a heater operates at a low noise level.
   9. It has automatic phase surveillance.
   10. If there are multiple units, it is possible to provide a sequential starting.
   11. For a long compressor lifetime, the air conditioners have HP/LP press start switches.
   12. It has a facility for Fresh air intake.
   13. A forklift is ideally required for handling.

   Optional accessories for the camp air conditioner with heater model VAC-AC-M11

   1. If you want to fix the thermostat at a distance of up to 15 meters, we can provide an optional remote thermostat with a cable.
   2. The remote thermostat has both cooling and heating control.
   3. Insulated, flexible air duct of diameter 315mm, length 3 meters incl. storage bag
   4. Uninsulated flexible air duct of diameter 315mm, length 5 meters incl. storage bag
   5. Air distribution air duct of diameter 315mm, length 6 meters.
   6. We can provide a trolley with wheels for easy movement.
   7. For higher heating capacity, we can provide a 12 kW booster heater.
   8. For better air filtration, we can provide F7 filter.

   Specifications of the camp air conditioner with heater model VAC-AC-M11

   1. The operating temperature range for cooling is 20 to 60 degrees Celsius.
   2. The operating temperature range for heating is -32 to +20 degrees Celsius.
   3. Airflow is 1700 cubic metres per hour.
   4. The sound level at 1 metre is 55dB(A).
   5. The refrigerant of VAC-AC-M11 is R134a.
   6. The nominal cooling capacity is 11 kilowatt.
   7. The heating capacity (optional) is 8 kilowatt.
   8. The power supply is 400 Volt, Three-phase, 50 Hz.
   9. The maximum running current for cooling is 15A; for heating is 16A.
   10. Locked rotor amperage (LRA) is 65.5A.
   11. Maximum power consumption for cooling is 4200W; for heating is 8800W.
   12. The hose connection is 1 x 315 Ø mm.
   13. Product size (h x l x w) is 735 x 1140 x 1140 millimetres.
   14. The weight of VAC-AC-M11 is 170 kilograms.

4. Shelter air conditioner model VAC-AC-M16

   The features of this model are listed below:

   1. The VAC-AC-M16 can maintain the shelter temperature at +20-25°C for s well-designed shelter.
   2. 16 pcs of these air conditioners can be loaded into a 20 ft. container.
   3. The VAC-AC-M16 model of shelter air conditioner is built into a strong metal frame with insulated panels.
   4. These models are a powder-coated finish.
   5. The standard paint finish of this shelter coolers is a standard sand colour.
   6. The scroll compressor provides a high degree of reliability.
   7. This shelter air conditioner operates at a low noise level.
   8. It has automatic phase surveillance.
   9. If there are multiple units, it is possible to provide a sequential starting.
   10. For a long compressor lifetime, the air conditioners have HP/LP press start switches.
   11. This shelter air conditioner has the facility for Fresh air intake.
   12. A forklift is ideally required for handling.
   13. You can stack one unit on top of another for transportation.

   Optional accessories for Shelter air conditioner model VAC-AC-M16

   1. An insulated duct of diameter 315mm.
   2. Uninsulated ducts flexible duct of Dia 315mm.
   3. Protection cover.
   4. Storage bags for uninsulated ducts.
   5. Grounding connection rod.
   6. Wheels and wheel bracket, suitable for holding the thermostat during transportation.

   Specifications of Shelter air conditioner model VAC-AC-M16

   1. The operating temperature range for cooling is 20 to 55 degrees Celsius.
   2. Airflow is 2200 cubic metres per hour.
   3. The sound level at 3 metres is 59dB(A).
   4. The refrigerant of VAC-AC-M16 is R134a.
   5. The nominal cooling capacity is 15 kilowatt.
   6. The power supply is 400 Volt, Three-phase, 50 Hz.
   7. The maximum running current for cooling is 13A.
   8. Locked rotor amperage (LRA) is 73A.
   9. Maximum power consumption for cooling is 7700W; for heating is 8800W.
   10. air duct connection is 1 x 315 Ø mm.
   11. Product size (h x l x w) is 1112 x 1370 x 1080 millimetres.
   12. The weight of VAC-AC-M16 is 220 kilograms.

5. Shelter air conditioner with heater model VAC-AC-M18

   The features of the model VAC-AC-M18 are given below:

   1. 24pcs of these air conditioners can be loaded into a 20 ft. container.
   2. The VAC-AC-M18 model fo shelter air conditioner with heater is built into a strong metal frame.
   3. These models of the shelter air conditioner with heater are powder-coated finish.
   4. The top finish painting is a standard sand colour.
   5. It has an optional heating facility to generate heating if the ambient temperature is below 20°C.
   6. The standard paint finish of these shelter coolers with heater is a standard sand colour.
   7. The scroll compressor provides a high degree of reliability.
   8. This shelter air conditioner with a heater operates at a low noise level.
   9. It has automatic phase surveillance.
   10. If there are multiple units, it is possible to provide a sequential starting.
   11. For a long compressor lifetime, the air conditioners have HP/LP press start switches.
   12. This shelter air conditioner with heater has the facility for Fresh air intake.
   13. A forklift is ideally required for handling.
   14. You can stack one unit on top of another for transportation.

   Optional accessories for the air conditioner with heater model VAC-AC-M18

   1. If you want to fix the thermostat at a distance of up to 15 meters, we can provide an optional remote thermostat with a cable.
   2. This remote thermostat is suitable for heating and cooling.
   3. An optional selector switch can be provided for the shelter air conditioner with a heater.
   4. Insulated, flexible air duct of Diameter 400mm, 3-meter long incl. storage bag.
   5. Uninsulated flexible air duct of Diameter 400mm, length 5-meter incl. storage bag.
   6. Air distribution duct of Diameter 400mm, 6 meters.
   7. We have a customized trolley with wheels for handling the shelter air conditioner with a heater.
   8. For better air filtration, we can provide an F7 filter.

   Specifications of the air conditioner with heater model VAC-AC-M18

   1. The operating temperature range for cooling is 20 to 60 degrees Celsius.
   2. The operating temperature range for heating is -32 to +20 degrees Celsius.
   3. The airflow of the shelter air conditioner model VAC-AC-M18 is 2500 cubic metres per hour.
   4. The sound level at 3 metres is 59dB(A).
   5. The refrigerant of VAC-AC-M18 is R134a.
   6. The nominal cooling capacity is 17.5 kilowatt.
   7. The heating capacity (optional) is 6/16 kilowatt.
   8. The power supply is 400 Volt, Three-phase, 50 Hz.
   9. The maximum running current of this shelter air conditioner for cooling is 16A.
   10. The maximum running current for heating is 26A.
   11. Locked rotor amperage (LRA) is 73A.
   12. The maximum power consumption for cooling is 8300W.
   13. Maximum power consumption for heating is variable.
   14. The hose connection is 1 x 400 Ø mm.
   15. Size (h x l x w) of shelter air conditioner model VAC-AC-M18 is 780 x 1450 x 1140 millimetres.
   16. The weight of VAC-AC-M18 is 240 kilograms.

   Specifications of the air conditioner with heater model VAC-AC-M18 (60 Hz)

   1. The operating temperature range of this shelter air conditioner which operates at 60 Hz for cooling is 20 to 60 degrees Celsius.
   2. The operating temperature range for heating is -32 to +20 degrees Celsius.
   3. Airflow is 2500 cubic metres per hour.
   4. The sound level of this 60 Hz, airconditioner at 3 metres is 59dB(A).
   5. The refrigerant of VAC-AC-M18 (60 Hz) is R134a.
   6. The nominal cooling capacity is 17.5 kilowatt.
   7. The heating capacity (optional) is 6/16 kilowatt.
   8. The power supply is 208 Volt, Three-phase, 60 Hz.
   9. The maximum running current of this 60Hz, Air conditioner for cooling is 33A.
   10. The maximum running current for heating is 52A.
   11. Locked rotor amperage (LRA) is 164A.
   12. The maximum power consumption of this 60Hz, Shelter/Camp/Tent Air conditioner for cooling is 8300W.
   13. Maximum power consumption for heating is variable.
   14. The hose connection is 1 x 400 mm in Diameter.
   15. Product size (h x l x w) is 780 x 1450 x 1140 millimetres.
   16. The weight of VAC-AC-M18 (60 Hz) is 243 kilograms.

6. Mobile air conditioner with heater (optional) for tents & camps; model VAC-AC-M18-CBRN

   The features of the air conditioner model VAC-AC-M18-CBRN for tents and camps are given below:

   1. The VAC-AC-M18-CBRN model of shelter air conditioner with heater (optional) is built into a strong metal frame with insulated panels.
   2. This model of air conditioner for tents and camps are a powder-coated finish.
   3. The standard paint finish of this shelter cooler with heater (optional) is a standard sand colour.
   4. The scroll compressor provides a high degree of reliability.
   5. This air conditioner for tents & camps operates at a low noise level.
   6. It has automatic phase surveillance.
   7. If there are multiple units, it is possible to provide a sequential starting.
   8. For a long compressor lifetime, the air conditioners have HP/LP press start switches.
   9. This air conditioner for tents & camps has the facility for Fresh air intake.
   10. A forklift is ideally required for handling.
   11. You can stack one unit on top of another for transportation.

   Optional accessories for Mobile air conditioner for tents & camps

   1. If you want to fix the thermostat at a distance of up to 15 meters, we can provide an optional remote thermostat with a cable.
   2. This remote thermostat is suitable for heating and cooling.
   3. An optional selector switch can be provided for the shelter air conditioner with a heater.
   4. Insulated, flexible air duct of Diameter 400mm,  3meter incl. storage bag.
   5. Uninsulated, flexible air duct of Diameter 400mm, length 5-meter incl. storage bag.
   6. Air distribution air duct of Diameter 400mm, 6meter length.
   7. We have a customized trolley with wheels for handling the shelter air conditioner with a heater.
   8. For better air filtration, we can provide an F7 filter.
   9. For better filtration of air, we can provide a HEPA filtration unit.

   Specifications of Mobile air conditioner for tents & camps

   1. The operating temperature range for cooling is 20 to 60 degrees Celsius.
   2. The operating temperature range for heating is -32 to +20 degrees Celsius.
   3. Airflow is 2500 cubic metres per hour.
   4. The sound level at 1 metre is 54dB(A).
   5. The refrigerant of VAC-AC-M18-CBRN is R134a.
   6. The maximum cooling capacity is 17.5 kilowatt.
   7. The heating capacity (optional) is 16/20 kilowatt.
   8. The power supply is 400 Volt, Three-phase, 50 Hz.
   9. The maximum running current for cooling is 16A.
   10. The maximum running current for heating is depending on heating capacity.
   11. Locked rotor amperage (LRA) 73A.
   12. Power consumption cooling/heating is 8300W.
   13. The hose connection is 1 x 400 Ø mm.
   14. Product size (h x l x w) is 780 x 725 x 1140 millimetres.
   15. The weight of VAC-AC-M18-CBRN is 137 kilograms.
   16. The weight of VAC-AC-M18-CBRN (without accessories evap/cond) is 104 kilograms.

Product Details of portable air conditioning units for camps and tents:

1. Product Title: Portable air conditioning units for camps and tents; Easy to install and dismantle.
2. Product Description: portable types of air conditioners for tents, military camps, relief camps, field hospitals, makeshift hospitals, temporary buildings etc
3. Brand Name:VackerGlobal
4. Price: USD 24380.00
5. Price valid until: 30-June-2022
6. SKU: 1016000012
7. Additional Type: VAC-Ac-M11
8. Seller Organisation:VackerGlobal

Please check the latest specifications and prices with our offices before purchase.

In the Middle East, we supply air conditioners for tents, relief camps, housing camps, labour camps, temporary housing, etc. to the United Arab Emirates, Kingdom of Saudi Arabia, Oman, Qatar, Bahrain, Iraq, Erbil, Lebanon, Egypt, Jordan, Libya, Tunisia etc.
In Africa, we serve countries including Kenya, Algeria, Tanzania, Djibouti, Chad, Ghana, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, Angola, South Africa etc.

Also, we supply air conditioners for tents, relief camps, housing camps, labour camps, temporary housing etc. to India, Bangladesh, Pakistan, Afghanistan, Kazakhstan, Srilanka, Maldives and Cyprus.